Dt-07b Portable Charging Palm Strobe 50 / ~20000 / Minute

Place of Origin: China
Model number: DT-07B
Configuration: Digital display screen, lithium battery, cable, lamp
Frequency range: 50 times / min ~ 3600 times / min
Voltage: 220V

Description:

Stroboscope widely used in gravure printing pattern tracking, important for printing quality inspection and improve. Suitable for electrostatic working environment. Portable and fixed type, easier to operate and durable. There is high and low conversion switch, you can choose the suitable gear when use, until you find the same frequency with the machine. It also has memory function. Next time can be used directly into the last time at the end of the frequency adjustment.

Charging Function:

It is quick intelligent charging, when charging, plug the 220V power cable.
Intelligent charging started to work. 30minutes can charge 95% and go to slow filling. It will stop charging automatic when the battery is full. More protect the lithium battery.

Technical data:

Power supply: AC110V  AC220V +/- 10%, 2A, 50HzPower: <80WFrequency range: 50 times / min ~ 3600 times / minSingle work time: the function key setAmbient light illumination: < 10000 LuxTrigger signal range: 5~12V pulse signal

"Signal": internal trigger / external triggering toggle key. Press the signal key, can switch the trigger, and the display panel will change into "INT" (internal trigger ) or "EX"(external triggering )"MODE":  

When in internal trigger mode, you can choose 3600 or 600 full scale display mode. Press MODE Key one time, then press "+", "-", you can choose between 3600 or 600. After decide the mode, it will auto confirm after 5 seconds (if the power outage, restart the device, the default mode is 3600. ) Special demands, you can choose 4000, 5400, 14400, 20000 times / min CPU chip.  

" X 2 " : Internal trigger frequency multiplication. Press one time, the current frequency doubling, until the full scale."÷2": Internal trigger frequency demultiplication. Press one time, the current frequency reduction of times." + ": Press this button, the corresponding data value increases." - ": Press this button, the corresponding data value decrease.

5 digits display screen: it will display the work value when working, but display the selection function when selecting.INT(Internal Trigger light): this light on, means the working mode is internal trigger status.EX(External Trigger light): this light on, means the working mode is external trigger status.RPM: this light on, show the stroboscope light flash value.DEG: this light on, means choosing the external trigger synchronous hysteresis angle.

Single work time setting: Single work time means the strobe continuous working time from work to automatically stop. Stops flashing, the screen displays the word "PAUSE", then press any key to resume strobe operation. This feature is designed to save energy, improve lamp life

Modify a single working hours as follows:

Turn off the power switch, press the "MODE" key, then turn on the power switch, the display shows the original set value,  10 seconds per unit (display 12 is 120 seconds) Press "+, - " key to modify the data value, complete after five seconds automatically store data and confirm. (it can be set as: 0 to exit this function)

Contact us: